Why fit?
The MMR Performance Charge Coolers for the S63-powered BMW M5 F1x improves power and torque output significantly by substantially reducing charge air temperatures. Using a large tube and fin stepped core, these coolers provide literally double the cooling area and almost 28% larger per cooler than OE.
Benefits of fitting?
The MMR Performance Top Mount Charge Cooler for the S63-powered M5 improves power and torque output significantly by substantially reducing charge air temperatures versus the OE cooling setup. This race-proven cooler really is essential for every stage of tuning on any high performance S63-engined M-car.
The factory charge coolers used on the S63 engine have proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air intake temperatures soar.
Our massive replacement Charge Coolers are the best performing cooler upgrade on offer for the S63. The intercooler core was developed specifically for the high requirements of the F10 M5. Using a large tube and fin stepped core, our performance charge coolers provides literally double the cooling area and almost 28% larger per cooler than OE, too.
Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production cooler.
The core itself uses internal turbulators to improve its cooling performance and the CFD optimised cast end tanks assist with maintaining the best possible airflow across the core.
Confirmed
applications.
MAKE:
BMW
MODEL:
M5
CHASSIS:
F10
ENGINE:
S63
YEARS:
2011 - 2016
Features:
> 28% increase in core size per each charge cooler compared to the OEM charge air coolers.
> Delivers substantial temperature drop across the core, with minimal impact on pressure drop
> Anti-corrosive thermal coating
Fitting note:
> Easy installation, not cutting or permanent modification to the vehicle required
How we develop.
Every MMR Performance upgrade is developed and tested here in the UK by our expert engineering team of BMW enthusiasts.
Nothing gets the MMR logo until we've thoroughly proven it on road, track and dyno.
That's the MMR Performance difference.
How to buy?
Our network of expert MMR Performance dealers can supply the full range, together with product guidance and advice, plus often an experience fitting service.
If you haven't got a MMR Performance Partner Dealer close to you, don't worry! Remember you can buy direct from our MMR Performance webshop. Click here to browse and shop online, for worldwide despatch.
