Why fit?
The MMR Performance Top Mount High-Performance ChargeCooler for the BMW M4 F82's S55 engine improves power and torque output significantly by substantially reducing charge air temperatures versus the OE cooling setup. This intercooler core offers 114% more external core volume compared to the stock cooler.
Benefits of fitting?
The MMR Performance Top Mount Performance ChargeCooler for the S55 engine found in the F82 M4 improves power and torque output significantly by substantially reducing charge air temperatures versus the OE cooling setup. This race-proven cooler really is essential for every stage of tuning on any high performance S55-engined M-car.
The factory chargecooler used on the S55 engine has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar.
Our massive replacement ChargeCooler is the best performing cooler upgrade on offer for the S55. The intercooler core was developed specifically for the high requirements of the BMW M2C/M3/M4 and offers an incredible 114% more external core volume compared to the stock cooler.
Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production cooler.
The core itself uses internal turbulators to improve its cooling performance and the CFD optimised cast end tanks assist with maintaining the best possible airflow across the core.
Confirmed
applications.
MAKE:
BMW
MODEL:
M4
CHASSIS:
F82 I F83
ENGINE:
S55
YEARS:
2014 - 2020
Features:
> 287 mm x 185 mm x 115 mm Tube and Fin Core
> Delivers substantial temperature drop across the core, with minimal impact on pressure drop
> Anti-corrosive thermal coating
> Easy installation
Fitting note:
> Please note, for fitment on M2 Competition, slight trimming of the underside bonnet bracing will be required (or fitment of the CS bonnet).
How we develop.
Every MMR Performance upgrade is developed and tested here in the UK by our expert engineering team of BMW enthusiasts.
Nothing gets the MMR logo until we've thoroughly proven it on road, track and dyno.
That's the MMR Performance difference.
How to buy?
Our network of expert MMR Performance dealers can supply the full range, together with product guidance and advice, plus often an experience fitting service.
If you haven't got a MMR Performance Partner Dealer close to you, don't worry! Remember you can buy direct from our MMR Performance webshop. Click here to browse and shop online, for worldwide despatch.
