What does it do?

Issues relating to the standard three-piece crank hub on the S55 engine are widely known, but these are fully addressed with the installation of the MMR Performance one-piece billet crank hub and capture plate.

The OE units friction plate are known to slip, causing the timing to alter enough that piston-to-valve contact can occur and, if not totally standard and within the warranty period, leaves owners with a very expensive repair bill!

We know of this problem only too well, having experienced this issue twice ourselves, so we were committed to developing a product that would ensure owners of standard power outputs have complete peace of mind, as much as those that wish to increase the power and torque output without having to worry; MMR have engineered the most comprehensive solution on the market and at one of the most compelling price points.

The MMR Performance one-piece crank hub is machined from billet EN36 that's been heat-treated with a 0.75mm case hardening, making it incredibly strong and durable.

The one-piece design ensures the friction plates can't slip and with a new crank bolt tightened appropriately, this alone delivers a substantial improvement in reliability versus the OE version.

For the ultimate solution, which then also removes the possibility for this bolt to be able to loosen, we've engineered an additional billet aluminium capture plate that securely houses the whole head of the crank bolt, making it impossible for it to come undone.

Careful design has also allowed us to develop a solution that's easy to install compared to some other products as there's no drilling or modification required to the OE crankshaft, which saves you time and ultimately money, too.

MMR PERFORMANCE

MMR20-1003FK

ONE PIECE CRANK HUB UPGRADE KIT : BMW S55 & N55

MMR20-1003FK

Why fit?

Installation of the MMR Performance One Piece Crank Hub and Capture Plate Kit fully addresses the well-known crank hub issues on BMW’s S55 engines in M2C, M3 and M4 models. By securely preventing the OE unit’s friction plate from slipping, catastrophic piston-to-valve contact is prevented once and for all.

Confirmed

applications.

MAKE:

BMW

MODEL:

All

CHASSIS:

All

ENGINE:

N55

PRODUCT OPTION:

The MMR crank hub kit is available in two forms, with either our one-piece crank hub, or our one-piece crank hub together with our billet capture plate, please select your required option when ordering.

Workship white_edited.jpg

How we develop.

Every MMR Performance upgrade is developed and tested here in the UK by our expert engineering team of BMW enthusiasts.

Nothing gets the MMR logo until we've thoroughly proven it on road, track and dyno.

That's the MMR Performance difference.

MMR_04.jpg
IMG_3356.JPG

How to buy?

Our network of expert MMR Performance dealers can supply the full range, together with product guidance and advice, plus often an experience fitting service.

 

If you haven't got a MMR Performance Partner Dealer close to you, don't worry! Remember you can buy direct from our MMR Performance webshop. Click here to browse and shop online, for worldwide despatch.

workshop.jpg
MMR_05.jpg

Prefer to buy online?

You can buy direct from our MMR Performance webshop. Click here to browse and shop online, for worldwide despatch.