Keep cool with the MMR Performance Intercooler for the BMW N47-powered 2.0 diesel 320d. Improve power and torque output significantly by substantially reducing charge air temperatures from the super efficient tube and fin stepped core - with 90% larger frontal area and 37% more internal volume than OE.
Benefits of fitting?
The MMR High Performance Intercooler for the N47-powered 320d improves power and torque output significantly by substantially reducing charge air temperatures versus the OE cooling setup.
The MMR Performance High Performance Intercooler is a direct-fit replacement unit that uses a super-efficient Tube and Fin core specifically engineered to support maximum performance gains on N47-powered 2.0 120d, 123d and 320d.
With the right modifications, the N57 diesel is more than capable of producing good power, but the additional heat that generates is often enough to overwhelm the standard cooling setup, showing up as serious power losses during hard driving as air temperatures soar, and long recovery cool-down times needed.
Using a large Tube and Fin stepped core, our performance intercooler provides literally double the frontal area and almost 40% more volume than OE, too with minimal pressure drops. The core itself uses internal turbulators to improve its cooling performance and the CFD optimised cast end tanks assist with maintaining the best possible airflow across the core.
Despite the large core size, due to the Tube and Fin construction, the Intercooler weights just 5.4kg whilst still providing the best solution possible when power output and low air charge temperatures with minimal pressure drop are required.
Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.
2005 - 2011
> Tube and fin stepped core
> 90% larger frontal area than OE
> 37% more internal volume than OE
> Delivers substantial temperature drop across the core, with minimal impact on pressure drop
> Anti-corrosive thermal coating
> Easy installation, not cutting or permanent modification to the vehicle required
How we develop.
Every MMR Performance upgrade is developed and tested here in the UK by our expert engineering team of BMW enthusiasts.
Nothing gets the MMR logo until we've thoroughly proven it on road, track and dyno.
That's the MMR Performance difference.
How to buy?
Our network of expert MMR Performance dealers can supply the full range, together with product guidance and advice, plus often an experience fitting service.
If you haven't got a MMR Performance Partner Dealer close to you, don't worry! Remember you can buy direct from our MMR Performance webshop. Click here to browse and shop online, for worldwide despatch.